Module Capteur de pression résistant à l'eau LPS35HW

LPS35HW is an ultra-compact piezoresistive, digital pressure sensor with output barometer.

The device includes a sensing element and an IC interface. The sensing element that communicates through IIC or SPI can detect absolute pressure. This digital sensor has low power consumption, current consumption as low as 3uA, and a wide measurement range from 260hPa to 1260hPa.

Parameter:

Power supply voltage: 1.7V-3.6V

High overpressure capability: 20 times full scale

Communication interface: SPI and I2C interface

Interrupt function: data ready, FIFO flag, pressure threshold

Embedded temperature compensation

24-bit pressure data output

16-bit temperature data output

ODR from 1Hz to 75Hz

Embedded FIFO

Pin Description:

VCC: Power terminal

GND: Ground

SCL: I2C serial clock

SPI: Serial clock

SDA: 12C serial data

4-wire SPI serial data input

3-wire serial data input / output

SDO: 4-wire SPI serial data output

The least significant bit of the I2C device address

CS: SPI enable, I2C / SPI mode selection

(1: SPI idle mode / 12C communication is enabled; 0: SPI communication mode / 12C disabled)

INT: Interrupt pin